- Trimmer comes with everything you need to start trimming right out of the box.
- Includes leaf collector and hopper
The 3.0 Medical Grade Trimming System is one of the highest industrial capacity automated trimmers in the world – and it comes Health Canada/FDA ready! This machine is composed of medical grade anodized aluminum and stainless-steel components to meet all regulatory standards. This machine can replace up to 160 human trimmers – without sacrificing quality and will harvest a whopping 200lbs of wet product or 40lbs of dry product per hour of use! The 3.0 Standard System comes all-inclusive with the largest hopper in the industry, a 6 horsepower leaf collector suction system and our unique triple-bag kief filtration & trim collection system. Our machines are specially designed to trim both wet and dry material. We also include a double set of tumblers to reduce downtime between cleanings. Just swap the tumbler out and keep running.
Upgrade your tumblers from our standard Electropolish to Quantanium Coated for for non-stick trimming. Prevent precious trichomes from adhering to the tumbler surface without the need for special lubricants or sprays. This also speeds up the harvesting process since no downtime is required to stop and clean the tumblers throughout the day. A simple wipe down with a cloth and warm water will remove the small amount of residue that may be present.
This item may not be returnable. Please be sure to verify you are ordering the correct product you need. If this item is returnable you may incur a restocking fee. If you have any questions feel free to call or email us.
Free Shipping In The Lower 48 states.
Input Voltage: 13Amp – 110V NA | 3.5Amp – 220V EU/AUS
Dimensions: 36″ L x 36″ W x 28″ H
Tumbler Diameter: 3 x 6.5"
Tumbler Length: 3 x 35”
Number of Tumblers: 6
Human Trimmer Replacement: 160 workers
Processing Capability: Wet: 200 lbs/hr | Dry: 40 lbs/hr
Cuts Per Minute: 140,000
Warranty: 10 year
What are the Benefits of Quantanium Non-Stick Tumblers?
Quantanium is a multi-coat nonstick with a unique mix of titanium particles blended into each coat. Quantanium’s multi-layer internal reinforcement of titanium creates resistance to scratching, abrasion and wear that exceeds most internally re-inforced and all conventional nonstick coatings on the market. In addition, all of our Quantanium non-stick coated tumblers are made without PTFE/PFOA.
- The non-stick properties of the Quantanium tumbler prevents precious trichomes from adhering to the tumbler surface without the need for sprays. This results in the end-product having a better visual appearance while maintaining its strong natural aroma and flavors. Overall, this results in a better-quality end-product as the natural properties are preserved during the harvesting process
- Another benefit of the Quantanium tumbler is that it speeds up the harvesting process since no downtime is required to stop and clean the tumblers throughout the day. A simple wipe down with a cloth and warm water will remove the small amount of residue that may be present.
- When cleaning the Quantanium tumbler, we recommend that you DO NOT pressure wash it. This will cause the coating to flake and come off. Treat the tumbler the same way you would treat a non-stick pan at home by letting it soak in warm, soapy water. After letting it soak, rinse the tumbler and then wipe it with a soft, clean cloth.
Why Choose Centurion Pro Trimming Machines?
Many people would say that the most labor-intensive step in the production of cannabis is the harvest and all would agree that its the most tedious. With the rise in popularity of trimming machines in the market there has been a large interest from consumers to see quantitative numbers on marijuana trimming times and weights. Unfortunately, this interest is often answered by misinformed and misspelled forum posts by individuals with little experience with trimming machines. This article aims to provide clear information for your comparison purposes and to show how using a trimming machine to harvest marijuana can save you valuable time and money.
According to a 2016 Marijuana Venture article about professional trimming crews, an experienced trimmer can do around 2 lbs of dry material in an 8 hour day. The CenturionPro 3.0 trimming machine can process up to 40 lbs of dry product in an hour, assuming you have your material prepped and ready to feed into the machine. Based on 2 lbs dry per person every 8 hours, which equals 0.25 lbs per hour per person. This means it would take 160 human trimmers to equal the hourly throughput of one of our trimming machines.
According to the same article, the estimated cost to the grower is between $150 and $225 per lb for the trimming services. This means that our trimmers can pay for themselves in less than a day worth of professional trimming services.
Cannabis trimming machines are ready at the push of a button. This means no more motivating crews of people to get started in the morning with coffee and donuts. Along those same lines machines don’t need food or long lunch breaks, as long as you can buck the stalks fast enough the machine will continue to process at a steady rate for up to 4 hours. After 4 hours of unit run time it is best to disconnect the trimming machine from power for a light clean before restarting operation.
Using a cannabis trimming machine allows you to free up resources in your operation and allows you to do more with less. Only one individual is required to run the trimming machine while others can focus on bucking the stalks and moving product to drying racks or storage. Any other employees who would have normally been dedicated to bud trimming during this time can now focus on other tasks
As the cannabis industry evolves producers will have to become more competitive. Lowering the overhead associated with trimming marijuana is an easy way to add profit to your pocket. The cost of a one-day rental is a fraction of what you would spend hiring a crew to trim your product. Rounding up a crew to process your bumper crop will no longer be an issue. No more no-shows and flaky people to deal with. In addition, trimming machines are easily portable and disassemble for cleaning in just a few seconds. Lastly, the machine is pressure washable for easy cleanup (minus the tumbler).
In an industry where security is pertinent to reputation and mitigating risk, trimming machines run by a small crew are a smart alternative to large weed trimming parties. Unfortunately, “loose lips sink ships”; each new crew member added for a harvest, increases the opportunity for risk. As the cannabis industry matures regulations on producers will call for higher security which increases costs with each new employee hired.
Remember, trimming machines don’t talk or have ulterior motives.
Hand-trimming marijuana can have varied results from person to person, but a machine produces a consistent product every time. Machine trimmed product is very uniform. In addition, quality trimming machines are adjustable to deliver a desired level of trim. Trimming machines also excel at trimming smaller flowers clusters often ignored by hand trimmers. With a well-maintained trimming machine the quality of your final trimmed product will look the same batch after batch. Consequently, the same can’t be said about human trimmers who get tired and sloppy after a day of trimming, resulting in inconsistent results. Instead of relying on other people to share the same level of pride in your product, use a trimming machine to deliver beautiful results time and time again.
As your seed to shelf life-cycle continuously improves your harvest methods should too; don’t let epic strains and huge colas be your only focus. Supplementing your harvest with a trimming machine yields instant ROI in time savings. Trimming machines are easily scalable, unlike trimming crews. Adding another trimming machine to your fleet is as simple as renting or buying another unit. Hiring new members for your trimming takes time and energy you could be spending elsewhere. For comparison adding another machine is the equivalent of adding 25 people to the operation.
Trimming machines are compatible with other accessories to make trimming even more efficient.
People often ask about the final quality of machine trimmed product and how it compares to hand trimmed product. The current generation of trimming machines provides close to hand-trimmed quality at a much faster pace than hand trimming.